EngiMaster - Flybox Innovative Avionics

Go to content
EngiMaster is a compact and streamlined EIS designed for fixed and rotary wing aircrafts. It can be mounted horizontally or vertically to suit all panels, it also fits in small cockpits thanks to its light weight and compact dimensions.
It is compatible with all the injected and naturally aspirated Rotax Engines, and can be interfaced with almost all the engines on the market.
With its 4,3” screen, it can display up to 6 EGTs and CHTs, providing you with all the critical information you need. Engine data are sampled 20 times per second, to have up-to-date informations and alerts instantly when detected.
EngiMaster offers a wide range of optional features, displayed in 3 easily accessible screens.
Price: 1.100,00 €
(Price exc.Vat)

See optionals from Components tab below.

EngiMaster for Fixed wings
EngiMaster Fixed Wing - Horizontal
Cod. 661000FH
EngiMaster for Rotary wings
EngiMaster Rotary Wing - Horizontal
Cod. 661000RH

Vertical version
EngiMaster Fixed Wing - Vertical
Cod. 661000FV
EngiMaster Rotary Wing - Vertical
Cod. 661000RV
Screens for Fixed Wings
Screen for Rotary Wings
  • In the main screen you can see: Rotor RPM, Engine RPM, MAP, Oil, Pressure and Temp, Coolant temp, EGTs, CHTs, Fuel pressure and quantity.
  • The second screen features Volt, Amp, IAT and OAT gauges, as well as the different Hobbs meters measures.
  • The third screen (datalogger) features an easy to use data viewer which allows to scroll through all the engine and optional probes collected data.

EngiMaster is available for:

- Engines with carburator.
- Engines with injection.

  • Engine RPM
  • Rotor RPM
  • MAP with integrated sensor
  • Oil pressure
  • Oil temperature
  • 6 CHT inputs
  • 6 EGT inputs
  • Fuel pressure
  • OAT (Outside Air Temperature)
  • CAT (Carburetor/AirBox Air Temperature)
  • Voltmeter
  • Amperometer
  • Hour-meter, divided also by time in green, yellow and red zones
  • Peak Engine RPM memories (last flight RPM peak and max RPM ever)
  • Peak Rotor RPM memories (last flight RPM peak and max RPM ever)
  • Flight Chronometer
  • Local Time-UTC Time (GPS connection required)
  • 3 Composite video input
  • 2 inputs for remote switches

  • Fuel  computer (fuel flow, endurance, remaining fuel, burned fuel, range and  reserve at destination). It's possible to activate 3 alarms for the remaining fuel, time to empty and for balancing tanks.
When a measure  drops below its setpoint the alarm is activated on both display and/or audio out tone or vocal alert.
The Fuel Computer functions will require the optional Fuel Computer Activation Key cod. 661000.
  • 3 fuel level sensor inputs with calibration for capacitive and resistive senders.

  • 200 hours Data Logger with integrated Graphic Data Viewer and possibility to export data
  • Software upgradable by means of USB pen drive
  • Data sampling 20 Hz
  • Engine alarms are activated when the relative measurement is out of range, they can be both displayed and on the audio out tone or voice alert message.

Technical specifications:
  • Dimensions: 125 x 83,7 x 18 mm (Display unit); 135 x 79 x 20 mm (Remote Module)
  • Weight: 185 g + 180 g
  • Operating temperature range: -20~+70 °C
  • Supply voltage: 12~30 Vdc
  • Supply current: 260 mA
  • 4.3” TFT color LCD screen.
  • Display brightness: 1000 nits, adjustable.
  • Audio LineOut for intercom
  • 2 CAN Bus communication interfaces
  • GPS input: standard RS-232, data format: NMEA-0183, sentences required: $GPRMC and $GPRMB
  • 1 USB port
  • Internal storage for 200 hours of datalogger
The following wiring and probes are available
- Cod. 601008 EGT probe with 2.5 m cable + coupling to weld
- Cod. 601013 Pre-wired cable for EGT probes
- Cod. 601020 OAT probe (Outside air temp.) with 2.5 m cable
- Cod. 601030 CAT probe (Rotax airbox air temp.), 10x1 thread and 2.5 m cable
- Cod. 503030 RedCube Fuel Flow transducer
- Cod. 661055 EngiMaster Fuel Computer Page Software Activation Key
- Cod. 601041 Fuel pressure transducer with 2.0 m cable + fitting
- Cod. 601060 Ammeter probe +/- 50 A
- Cod. 601061 Ammeter probe +/- 100 A
- Cod. 602000 Oil pressure probe, Rotax 4-20mA compatible, with 1/8" NPT male thread
- Cod. 601070 Color camera
- Cod. 603000 Professional crimping tool
- Cod. 601090 GPS Receiver
© Microel s.r.l. - Flybox Copyright 2023 All rights reserved
Back to content